Webmaster Forum - View Single Post

Atom · 03-04-2005, 01:50 AM

I should add that in the example marked E, I used the eraser around the edge but it was with a selection present. If one was steady enough to erase with no selection present to restrict overlap, then you would see that the eraser tool alone (used freehand) leaves a considerably smooth edge, more so than feathering using a selection.

correction: that is not "rasterize the shape", but rasterize fill content that you must do before filling.

Layer/Rasterize/Fill Content

03-04-2005, 01:50 AM	#3 (permalink)
Atom v7n Mentor Join Date: 10-12-03 Location: Tennessee, USA Posts: 32,621 iTrader: 0 / 0% Latest Blog: None	I should add that in the example marked E, I used the eraser around the edge but it was with a selection present. If one was steady enough to erase with no selection present to restrict overlap, then you would see that the eraser tool alone (used freehand) leaves a considerably smooth edge, more so than feathering using a selection. correction: that is not "rasterize the shape", but rasterize fill content that you must do before filling. Layer/Rasterize/Fill Content Last edited by Atom; 03-04-2005 at 02:19 AM..